Ink filling method of the hottest Canon cartridge

2022-08-13
  • Detail

Ink filling method of Canon Ink cartridge

1, bc01/bc-02, bx-2, bc20 ink cartridge: use suptec Canon series ink

to determine the quality of the nozzle first, then use the small steel hook attached to the ink inner package to pull out the small plug on the ink cartridge, insert the probe of the ink bottle into the ink box for filling, and then plug the small plug back in place

2. Bc03/bx-3 ink cartridge: use suptec Canon series ink

first determine the quality of the nozzle, then use the blue hard cylinder attached to the ink inner package to press the steel ball on the surface of the ink cartridge with force, insert the probe of the ink bottle into the ink cartridge for filling, and then use the soft plug or steel ball attached to the ink inner package to seal the ink injection port, and then stick one (3) layer of transparent glue after shaping

3. Bc05 ink cartridge: enable imported and domestic joint venture manufacturers to use suptec Canon series inks

first determine the quality of the nozzle, then use the small steel hook attached to the ink inner package to pull out the three small plugs on the ink cartridge, select three clean toothpicks to probe into the water inlet respectively, take them out, observe the color stained on the toothpicks, and select the corresponding ink to fill

4, bci10bk/11bk/11c/21bk/21c and other ink cartridges: when using suptec Canon series ink

to add ink, just turn the ink cartridge upside down and slowly drip the corresponding ink into the ink outlet

5, bc243 laminated glass-61 ink cartridge: use suptec Canon series ink

this ink cartridge is three colors. When filling, please first determine the correct filling hole to ensure the correct color correspondence, then reverse the ink cartridge and place it on the newspaper, slowly drip the ink into the outlet hole, but for patients, when the ink is full, the excess ink will overflow from the exhaust air on the label of the ink cartridge. Immediately remove the overflow ink, reverse the ink cartridge, Ink may leak from the ink hole. Clear the ink leak and confirm that there is no ink leak. Put the ink cartridge into the printer and use it after cleaning

precautions:

1. Once the ink cartridge is used up, it should be filled with ink or replaced in time to avoid nozzle blockage caused by long-term exposure to the air

2. If the print head of the integrated ink cartridge (hot bubble type) is dry and blocked, immerse the print head (excluding the circuit board) in warm water for minutes to let the warm water dissolve the dry dye. After soaking in warm water, place the print head on a soft and clean paper towel to suck up the residual water from the nozzle. Do not wipe the print head with force. If it is not used temporarily, it can be stored in the print head protection seat

3. When adding ink, be careful not to splash the ink on the circuit board to avoid short circuit

--- printing consumables

Copyright © 2011 JIN SHI